Hid EDGE EVO EWM-M Wiegand Module Installation Guide Manuel d'utilisateur télécharger pdf

The EDGE EVO Door and Reader module is designed for interfacing with the EDGE EVO Hi-O Networked Controller to electronic door

components and a traditional Wiegand reader.

Designed for providing interface to traditional discrete access inputs and outputs, the Door component provides four analog/digital inputs

and two outputs. Congure the Door component in two ways; as a primary door interface to REX, Door Position Switch, Battery Fail, Power

Fail, Lock, and Aux (Group 1) or as a general purpose input/output module (Group 2).

Congure the Reader Module in two ways, either a Group 1 or Group 2 device. When two readers are present at one access control point,

the secure reader side is assigned Group 1.

Speciﬁcations

Door Module

CONDITIONS

VOLTAGE DC

(VDC)

CURRENT

(Amp)

POWER

(W)

OPERATING

TEMPERTURE

CABLE LENGTH

UL REF

NUMBER

Input

DC Input (NSC)

+12 VDC 0.04 Amp 0.48

32° - 122°F

(0° - 50° C)

Inputs = 500 ft (150 m)

Outputs = 500 ft (150 m)

Hi-O CAN Bus Total Length 100 ft (30 m) -

22 AWG ● 0.65mm ● 0.33mm

Maximum between drops 30 ft (10 m)

22 AWG ● 0.65mm ● 0.33mm

MEDMAxNN

x = K for Black

G for Grey

+24 VDC 0.04 Amp 0.96

DC Input (MAX)

+12 VDC 0.80 Amp 9.6

+24 VDC 0.80 Amp 19.2

Supervised inputs

(AC, Batt, REX, Door Mon) (MAX)

0-5 VDC

Reference

0.005 Amp

(Sink)

0.025

Output

Strike *** /

AUX

NC or NO

DC Output

(MAX)

AUX 12 VDC

Input @

Controller

Unregulated (Wet)

Jumpers

+10 to +12 VDC 0.70 Amp* 8.40

AUX 24VDC

Input @

Controller

Unregulated (Wet)

Jumpers

+23 to +24 VDC 0.70 Amp* 16.80

Regulated (Wet)

Jumpers – 12 VDC

+10 to +12 VDC 0.70 Amp* 8.40

PoE Input @

Controller

Unregulated (Wet)

Jumpers

+16.5 to 24 VDC 0.30 Amp* 7.2

Regulated (Wet)

Jumpers – 12 VDC

+10 to +12 VDC 0.50 Amp* 6.0

AUX 12-24 VDC

/ PoE Input @

Controller

Jumpers Set to Dry

+12 to 24 VDC

External

2.00 Amp** 24.00

Reader Module

CONDITIONS VOLTAGE DC (VDC)

CURRENT

(Amp)

POWER

(W)

OPERATING

TEMPERTURE

CABLE LENGTH

UL REF

NUMBER

Input

DC Input (NSC)

+12 VDC

0.03 Amp

0.36

32° - 122°F

(0° - 50° C)

Wiegand = 500 ft (152.4 m) - 22 AWG ● 0.65mm ● 0.33mm

MEWMAxNN

x = K for Black

G for Grey

+24 VDC 0.72

DC Input (MAX)

+12 VDC

0.70 Amp

8.4

+24 VDC 16.8

Data 1/CLK , Data 0/Data (MAX) 0-5 VDC Reference N/A N/A

Output

Reader PWR

Output VDC

(MAX)

AUX 12 VDC

@ Controller

+9.8 to +12.25 VDC

0.30 Amp* 3.67

AUX 24 VDC

@ Controller

0.60 Amp* 7.35

PoE Input @

Controller

0.50 Amp* 6.12

GRN LED, RED LED,

Beep and Hold (MAX)

0-5 VDC Reference

0.005 Amp

(sink)

0.025

External Tamper - (MAX) +5 VDC (NOM) 0.017Amp 0.085

NSC = Normal Standby Condition ** Each Relay

* Combined output rating not to exceed V*I = W *** Shared between relays

1.2 Amp (+24VDC AUX Input, 28.8 W)

1.2 Amp (+12VDC AUX Input, 12.96 W)

EDGE EVO

Door & Reader Module

EDWM-M

InstallatIon GuIde

82363-901, Rev C.1

December 2012

15370 Barranca Parkway

Irvine, CA 92618-2215

USA

1 2 3 4

Résumé du contenu

Page 1 - EDGE EVO

The EDGE EVO Door and Reader module is designed for interfacing with the EDGE EVO Hi-O Networked Controller to electronic door components and a tradit

Page 2 - 1 Wiring

Page 3 - Door / Reader Module

Page 4 - HID Global

RegulatoryULConnect only to a Listed Access Control / Burglary power-limited power supply, or Listed Access Control / Burglary PoE (Power-over-Etherne

Commentaires sur ces manuels

Pas de commentaire

Hid EDGE EVO EWM-M Wiegand Module Installation Guide Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Équipement Hid EDGE EVO EWM-M Wiegand Module Installation Guide. HID EDGE EVO EWM-M Wiegand Module Installation Guide User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement Hid EDGE EVO EWM-M Wiegand Module Installation Guide